Free Curtain Size Calculator UK: Find the Right Curtain Width

Choosing the right curtain size can make a big difference to how a room looks and feels. Curtains that are too narrow may look stretched when closed, while excessively wide curtains can create more fabric bulk than your space needs.

Whether you’re decorating a rented flat, updating your bedroom or choosing curtains for a living room, getting the measurements right before buying can save time, money and frustration.

Our free curtain width calculator helps you estimate how much flat curtain fabric you’ll need based on your pole or track width and preferred fullness.

Simply enter your measurements below to get started.

Curtain Width Calculator

Enter the width of your curtain pole or track (not the window glass). Choose how full you would like your curtains to look.

Suggested combined flat fabric width300 cmFor two equal panels: 150 cm per panel

Estimates only. These figures represent flat fabric width before gathering, not packaged curtain sizes. Heading styles (especially eyelet, pencil pleat, and wave), returns, overlaps and manufacturers' sizing instructions can change requirements. Check the supplier's measuring guide before buying. Curtain drop is not calculated here.

Please note: This calculator estimates flat fabric width before gathering. It does not calculate curtain drop, exact ready-made curtain pack sizes or the finished width of specialist headings. Always check the retailer’s measuring instructions before ordering.

How to Measure for Curtains Correctly

Before using the calculator, you’ll need one important measurement: the width of your curtain pole or track.

Step 1: Measure your curtain pole or track

If your curtain pole is already installed, use a metal tape measure to measure its usable width.

For a standard curtain pole, measure between the decorative end pieces, known as finials. Don’t include the finials themselves.

If you’re using a curtain track, measure the length the curtains will travel along. For curved or bay-window tracks, follow the track rather than measuring straight across the window.

Important: Measure the pole or track, not simply the width of the glass.

Curtain poles are usually wider than the window itself, allowing the curtains to cover the edges and gather when opened.

Step 2: Choose your preferred fullness

Curtain fullness describes how much extra fabric is used to create folds and gathers when curtains are closed.

For example, a 150 cm curtain pole with 2× fullness requires approximately 300 cm of combined flat curtain width.

Our calculator offers three options:

FullnessAppearanceBest suited to
1.5×Relaxed, lighter gatheringSome lightweight curtains and voiles
2×Balanced, classic fullnessMany conventional curtain styles
2.5×Deep, generous gatheringFuller decorative curtains

These are general fabric-width estimates. Different curtain headings may have their own recommended fullness.

For most straightforward calculations, 2× fullness is a useful starting point, but always check the instructions for your chosen curtains.

Step 3: Calculate your curtain width

Enter your pole or track measurement into the calculator and select your preferred fullness.

The tool will automatically display:

  • The suggested combined flat fabric width.
  • The estimated flat fabric width for each panel if you’re using two equal curtains.

For example, if your pole measures 180 cm and you choose 2× fullness, the calculator will recommend approximately 360 cm of flat fabric across both panels, or 180 cm per panel.

This gives you a useful starting point when comparing curtain sizes.

Curtain Width Calculator: Worked Examples

The table below shows how different pole widths affect the amount of fabric required.

Pole width1.5× fullness2× fullness2.5× fullness
100 cm150 cm200 cm250 cm
150 cm225 cm300 cm375 cm
180 cm270 cm360 cm450 cm
200 cm300 cm400 cm500 cm
250 cm375 cm500 cm625 cm

All results represent combined flat fabric width across the curtains, not the width of each individual panel.

For a pair of equally sized curtains, divide the combined figure by two.

Remember that actual manufactured curtain sizes may be rounded to available fabric widths, and additional allowances may be needed for overlaps, returns or particular heading styles.

How to Measure Curtain Drop

Curtain width is only half the calculation. You’ll also need to decide how far down your curtains should hang.

This measurement is called the curtain drop.

Our current calculator doesn’t calculate drop, but you can measure it separately using the following guidance.

Sill-length curtains

Sill-length curtains finish just above the windowsill.

They’re often practical in smaller rooms, kitchens or spaces where furniture sits beneath the window.

As a starting point, aim for approximately 1 cm above the sill, checking the supplier’s guidance.

Below-sill curtains

Below-sill curtains extend past the bottom of the windowsill, often by approximately 15 cm.

They can provide more coverage without extending all the way to the floor.

However, check the position of radiators, furniture and other obstructions before choosing this length.

Floor-length curtains

Floor-length curtains are popular in bedrooms and living rooms because they create a continuous line from the window towards the floor.

For a neat finish, curtains can hang approximately 1 cm above the floor.

Some people prefer curtains that just touch the floor or gather slightly on it, but this requires a different drop measurement.

Where should you measure from?

Your starting point depends on the curtain heading.

For eyelet curtains, measurements are commonly taken from the top of the curtain pole, although the fabric extends above the eyelets.

For pencil-pleat curtains on rings, measurements are generally taken from the eye of the curtain ring. For tracks, they are commonly taken from the top of the track.

Always check the retailer’s instructions because heading construction can change the finished length.

Understanding Different Curtain Heading Styles

Not every curtain heading uses fabric in exactly the same way.

Eyelet curtains

Eyelet curtains have metal rings fitted directly into the fabric heading.

They slide along a suitable pole and create regular folds.

Around 2× fullness is a common starting point, but the pole diameter, eyelet spacing and curtain construction can affect the final appearance.

Pencil-pleat curtains

Pencil-pleat curtains use heading tape and gathering cords to create narrow, closely spaced pleats.

They’re suitable for many tracks and poles.

The flat fabric width must be sufficient to create the desired gathers, and the finished heading is adjusted to fit the track or pole.

Tab-top curtains

Tab-top curtains hang from fabric loops that slide over a curtain pole.

They can create a relaxed appearance and may require less fullness than some other heading styles.

Always check the product’s recommended sizing.

Wave and pinch-pleat curtains

Wave curtains use specially designed tracks or heading systems to create regular folds.

Pinch-pleat curtains have structured pleats sewn into the heading.

These styles often require manufacturer-specific calculations, so a general fullness calculator should not be used as the final ordering measurement.

Curtain Measuring Tips for Renters

If you’re renting your home, measuring curtains can involve a few additional considerations.

You may already have a curtain pole or track installed by your landlord, or you might need a temporary solution that doesn’t involve drilling into the walls.

Start by checking whether the existing fittings are secure and suitable for your intended curtains.

If you’re considering a tension rod, adhesive-supported fitting or another removable option, pay particular attention to its stated weight capacity.

Heavy blackout or thermal curtains may not be suitable for every temporary fixing.

For more ideas, read our guide to How to Hang Curtains Without Drilling in a Rented Home.

You can also explore our renter-friendly decorating and storage guides for ways to improve a home without making unnecessary permanent changes.

Common Curtain Measuring Mistakes to Avoid

Measuring only the window glass

Curtains generally need to cover a wider area than the glass itself.

Measure the usable curtain pole or track rather than assuming the glass width is sufficient.

Forgetting about fullness

Buying curtains with a combined flat width equal to the pole width may leave them looking stretched when closed.

Allow enough additional fabric to create the gathering you want.

Confusing combined width with panel width

Some curtain products are sold as pairs, while others are sold as individual panels.

A calculator result of 300 cm combined width does not necessarily mean you need two curtains measuring 300 cm each.

Check whether the retailer lists the width per curtain or per pair.

Ignoring the curtain heading

Eyelet, pencil-pleat, tab-top and specialist headings can require different measurements.

Always check the specific product’s sizing guidance.

Forgetting to measure the drop

A curtain can be the correct width but still be too short or too long.

Measure the drop from the appropriate point on your track or pole before purchasing.

Overlooking radiators and furniture

Long curtains can interfere with radiators, furniture and access around a window.

Check the available space and choose a suitable length.

Frequently Asked Questions

How wide should curtains be compared with the pole?

For many conventional curtain styles, a combined flat fabric width of approximately twice the pole width is a useful starting point. Different headings and fabrics may require more or less fullness.

What size curtains do I need for a 150 cm pole?

At 2× fullness, you would need approximately 300 cm of combined flat fabric width, equivalent to 150 cm per panel for two equal curtains.

Check available ready-made sizes and the retailer’s recommendations before buying.

Is 1.5× fullness enough?

It can be suitable for a more relaxed appearance, particularly with certain lightweight fabrics or voiles. Other heading styles may require more fullness to hang correctly.

Is 2.5× fullness too much?

Not necessarily. It creates deeper gathers and can work well with suitable lightweight or decorative fabrics.

However, very heavy curtains may become bulky, so consider the material and the space available.

Does this calculator work for eyelet curtains?

It provides a general flat-width estimate that can help with planning eyelet curtains. However, the final purchase size should follow the manufacturer’s eyelet-curtain recommendations.

Does the calculator work for ready-made curtain pairs?

It can help you estimate the total flat width required, but it does not select a specific ready-made pack size.

Check whether the retailer quotes the width of each panel or the total width of the pair.

Can I use the calculator for bay windows?

You can use it as a starting point if you have measured the usable length of the curtain track or pole correctly.

For curved tracks, measure along the track. Specialist bay-window systems may require additional allowances.

Can I calculate curtain length here?

Not currently. This version calculates curtain width only. Use the drop-measuring guidance above and follow the retailer’s instructions for your chosen heading.

Make More of Your Home With Nookcroft

Choosing curtains is just one of the small improvements that can make a home more comfortable, practical and welcoming.

At Nookcroft, we focus on achievable ideas for real UK homes, including smaller spaces and rented properties.

Explore our guides to renter-friendly decorating, practical storage and simple DIY projects for more ways to make the most of the home you already have.

This free calculator is provided for general planning purposes. Curtain sizing varies by manufacturer, heading style and fabric. Always confirm measurements with your chosen supplier before purchasing or altering curtains.

Looking for more practical tools? Visit our Free Home & DIY Resources page for helpful calculators and guides designed for UK homes.