Free Paint Calculator UK: How Much Paint Do I Need?

Planning to decorate a room but not sure how much paint to buy? Getting the quantity right can save money, reduce waste and help you avoid running out halfway through a project.

Our free UK paint calculator helps you estimate how many litres of paint you’ll need for a rectangular room or an individual wall. Enter your measurements, choose the number of coats and use the coverage rate shown on your chosen paint.

Whether you’re refreshing a bedroom, repainting a living room or planning a feature wall, this guide explains how to measure your space and calculate a realistic paint allowance.

Free UK Paint Calculator

Use our calculator below to estimate the amount of paint required for your walls.

UK Paint Calculator

Estimate paint for a rectangular room or a single wall. Measure in metres and check the coverage on your chosen paint tin.

Estimated paint needed5.43 litresNet wall area: 29.6 m²

Estimate for walls only; ceilings and woodwork are not included. Subtract only areas you will not paint. Real coverage varies by surface, paint and application method. Round up to available tin sizes and follow the manufacturer's guidance.

Important: This tool estimates paint for walls only. It does not include ceilings, skirting boards, doors or other woodwork. Results are estimates rather than guaranteed quantities. Actual coverage varies depending on the paint, surface condition, preparation and application method.

How to Use Our Paint Calculator

Our calculator has two options: an entire rectangular room or a single wall.

Step 1: Choose What You’re Painting

Select Whole room (four walls) if you’re decorating a rectangular room with four walls of equal height.

Choose Single wall if you’re painting one wall, a feature wall or an individual wall section.

If your room has alcoves, a chimney breast, sloping ceilings or an unusual layout, calculating separate sections will usually give you a more accurate estimate.

Step 2: Measure Your Walls

For a whole room, enter:

  • Room length in metres
  • Room width in metres
  • Wall height in metres

For a single wall, enter its width and height.

Use a tape measure and record your measurements before opening the calculator.

If your measurements are in centimetres, divide by 100 to convert them into metres.

For example, a wall height of 240 cm becomes 2.4 m.

Measure the surfaces you actually intend to paint. If you’re only painting the lower half of a wall, enter the height of that section rather than the full room height.

Step 3: Subtract Doors and Windows

Doors and windows usually reduce the amount of wall paint required.

To calculate an opening’s area, multiply its width by its height.

For example:

1.2 m × 1.0 m = 1.2 m²

Repeat this for each opening you’re leaving unpainted, add the areas together and enter the total into the calculator.

For a room with a door measuring 1.8 m² and a window measuring 2.2 m², the total deduction would be 4 m².

Only subtract areas that aren’t receiving the wall paint. If you’re painting a door or its frame, calculate that separately using the appropriate paint coverage.

Step 4: Choose the Number of Coats

Two coats are common for interior wall painting, but the correct number depends on the product and surface.

You may need additional preparation or coats when:

  • Painting over a significantly darker colour
  • Covering uneven or patchy walls
  • Painting previously unpainted surfaces
  • Working with particularly absorbent or textured materials

Some paints are marketed for one-coat coverage, but their performance depends on the conditions specified by the manufacturer.

Always follow the instructions for the particular paint you’re using.

Step 5: Enter the Paint Coverage

Paint coverage describes how many square metres one litre can cover in a single coat.

You’ll usually find the coverage figure on the paint tin or manufacturer’s product information.

For example, if the label states 12 m² per litre, enter 12.

This is particularly important because different paints can have different coverage rates.

Don’t assume that a litre of every interior paint covers the same area.

Step 6: Add an Extra Allowance

The calculator includes an option to add extra paint to your estimate.

A 10% allowance can be a useful starting point for straightforward decorating work, helping account for minor measuring differences, application losses and touch-ups.

However, it may not be enough for unusually absorbent or textured surfaces.

Once you’ve entered your information, the calculator displays an estimated quantity in litres.

How to Calculate Paint for a Room

You don’t need complicated mathematics to estimate paint quantities.

The basic process is to work out the wall area, subtract openings, account for the number of coats and divide by the coverage rate.

The Formula for a Single Wall

For a rectangular wall:

Wall area (m²) = Width × Height

Imagine you’re painting a wall measuring 4 m wide and 2.4 m high.

4 × 2.4 = 9.6 m²

If the wall contains a window covering 1.5 m²:

9.6 − 1.5 = 8.1 m²

That’s the paintable area for one coat.

If you’re applying two coats, multiply that figure by two before dividing by the paint coverage.

The Formula for a Rectangular Room

For a rectangular room with four walls of equal height:

Total wall area (m²) = 2 × (Length + Width) × Height

Let’s use a typical example:

  • Length: 4 m
  • Width: 3 m
  • Height: 2.4 m

The calculation is:

2 × (4 + 3) × 2.4 = 33.6 m²

This is the combined area of the four walls before subtracting openings.

If the doors and windows cover 4 m²:

33.6 − 4 = 29.6 m²

Converting Wall Area into Litres

The next formula is:

Paint required (litres) = (Paintable area × Coats) ÷ Coverage per litre

For our example, using two coats and a coverage rate of 12 m² per litre:

(29.6 × 2) ÷ 12 = 4.93 litres, approximately.

Adding 10% to the unrounded calculation gives:

5.43 litres

This is the estimated amount required, not necessarily the amount you’ll purchase.

Paint is sold in particular tin sizes, so you’ll need to choose a suitable quantity that meets or exceeds your calculated requirement.

Paint Calculator UK: Worked Examples

The following examples show how much paint different rectangular rooms might require.

For consistency, each example assumes:

  • Wall height of 2.4 m
  • Two coats of paint
  • Coverage of 12 m² per litre
  • A 10% extra allowance
Room sizeGross wall areaOpeningsEstimated paint
3 × 3 m28.8 m²3 m²4.73 litres
4 × 3 m33.6 m²4 m²5.43 litres
4 × 4 m38.4 m²4 m²6.31 litres
5 × 4 m43.2 m²5 m²7.00 litres
6 × 4 m48.0 m²6 m²7.70 litres

These examples are illustrative rather than standard quantities for particular room types.

A bedroom and a living room with the same floor dimensions may require different amounts of paint because of their windows, doors, wall heights and surfaces.

For the most useful estimate, enter your own measurements into the calculator above.

How Much Does One Litre of Paint Cover?

Paint coverage varies by product.

As a broad illustration, some conventional interior emulsions advertise theoretical coverage of around 10–14 m² per litre per coat. Other products can be above or below that range.

The manufacturer’s stated figure should always take priority over a general estimate.

What Affects Paint Coverage?

FactorWhy it matters
Paint formulationDifferent products have different coverage rates
Surface textureRough or textured walls may use more paint
PorosityAbsorbent surfaces can take up more paint
Previous colourMajor colour changes may require extra coats
PreparationProperly prepared surfaces can give more consistent results
Application methodRoller, brush and spray application can have different losses

Coverage figures printed on tins are often based on specified testing conditions.

Real-world results may differ, particularly when painting older or uneven walls.

Painting Fresh Plaster

Fresh plaster needs particular care.

Before decorating, it must be sufficiently dry and prepared according to the plaster and paint manufacturers’ instructions.

Some suitable systems require a diluted first coat or specialist primer, while others have different preparation requirements.

Don’t assume every emulsion can be diluted or that every newly plastered wall should receive the same treatment.

Check the specific product guidance before painting.

If your first coat uses a different product or dilution from your finishing coats, calculate the quantities separately.

Should You Buy Extra Paint?

A small additional allowance can be useful, but buying excessive quantities creates unnecessary expense and waste.

Start with your calculated requirement and then consider the available tin sizes.

For example, if your estimate is 5.43 litres, buying only 5 litres would leave you below the estimated requirement.

You may need a larger tin or a combination of sizes, depending on the product range.

When buying multiple tins of the same colour, check the manufacturer’s advice on batch consistency. Where appropriate, combining paint from different tins before application can help maintain an even finish.

Keep a little suitable leftover paint for future touch-ups if practical, and store it according to the manufacturer’s guidance.

It’s also worth checking the cost per litre. A larger tin can sometimes be better value, but only if the extra paint is likely to be useful.

Does the Calculator Include Ceiling Paint?

No. Our calculator is designed for walls.

If you’re also painting a ceiling, calculate it separately.

For a rectangular ceiling:

Ceiling area = Length × Width

For a 4 m × 3 m room:

4 × 3 = 12 m²

If you’re applying two coats of ceiling paint at 12 m² per litre:

(12 × 2) ÷ 12 = 2 litres

With a 10% allowance, the estimate becomes 2.2 litres.

Use the coverage rate for your chosen ceiling paint rather than assuming it matches your wall paint.

You’ll also need separate calculations for skirting boards, doors, frames and other woodwork, particularly if they require a different coating.

How to Measure Awkward Rooms

Not every UK home has perfectly rectangular rooms.

Older terraced houses, loft conversions and compact homes may contain alcoves, chimney breasts, recesses and sloping surfaces.

These features can make a simple four-wall calculation less accurate.

Alcoves and Chimney Breasts

A chimney breast or alcove can introduce extra wall faces that aren’t represented by the room’s basic length and width.

Measure the actual surfaces you’ll paint, including the sides of any recesses or projections.

For complicated rooms, divide the walls into individual rectangles and calculate each section separately.

Sloping Walls

For triangular sections, use:

Triangle area = Base × Perpendicular height ÷ 2

For example, a triangular section with a base of 3 m and a perpendicular height of 1 m has an area of:

3 × 1 ÷ 2 = 1.5 m²

Add this to the other paintable sections.

Feature Walls

If you’re painting one wall in a different colour, select the calculator’s Single wall option.

This helps you estimate the paint required without including the other walls in the room.

Calculate each paint colour separately, especially if the products have different coverage rates or require different numbers of coats.

Painting a Rented Home

Painting can make a room feel dramatically different without major renovation work.

However, if you rent your home, check your tenancy agreement and obtain any necessary permission before redecorating.

Even a neutral colour change may require approval.

If your landlord or letting agent agrees, clarify whether the walls must be returned to their previous colour at the end of the tenancy.

Keeping written confirmation of agreed changes can help avoid misunderstandings.

If painting isn’t permitted, consider reversible decorating options instead.

A change of curtains, furniture arrangement, lighting or removable accessories may help refresh a room without altering its walls.

For more achievable improvements, explore our Simple DIY Home Improvements guide.

Common Paint Calculation Mistakes

Forgetting the Second Coat

One of the easiest mistakes is calculating enough paint for the wall area but forgetting that the job requires multiple coats.

Always include the planned number of coats.

Guessing Room Dimensions

Even small measurement errors can add up across four walls.

Measure the room rather than relying on an estimate or the dimensions shown in a property listing.

Using a Generic Coverage Rate

A general coverage figure is useful for early planning, but the actual paint label is more reliable.

Enter the manufacturer’s coverage rate whenever possible.

Ignoring Surface Condition

Rough, porous or heavily repaired walls can use more paint than expected.

Inspect and prepare your surfaces before making a final purchasing decision.

Forgetting Alcoves and Recesses

A rectangular-room calculation may miss additional wall faces.

Measure unusual sections separately.

Buying Exactly the Calculated Amount

The result is an estimate, not a guaranteed quantity.

Allow for realistic variation and check the tin sizes available.

Choosing Paint Before Testing the Colour

Paint can look different under daylight, artificial lighting and against existing furnishings.

Testing a sample before buying a large quantity can prevent an expensive mistake.

Frequently Asked Questions

How much paint do I need for a 4 m × 3 m room?

For a rectangular room measuring 4 m by 3 m with walls 2.4 m high, the gross wall area is 33.6 m².

If doors and windows total 4 m², two coats at 12 m² per litre with a 10% allowance require approximately 5.43 litres.

Is 5 litres of paint enough for a bedroom?

It may be enough for some bedrooms, but not all.

The answer depends on the room dimensions, wall height, openings, paint coverage and number of coats.

Measure your room and calculate the quantity rather than assuming all bedrooms require the same amount.

How much paint do I need for one wall?

Multiply the wall width by its height, subtract any unpainted openings, multiply by the number of coats and divide by the coverage rate.

For a 4 m × 2.4 m wall with no openings, two coats at 12 m² per litre and a 10% allowance require approximately 1.76 litres.

How much area does 2.5 litres of paint cover?

At a theoretical coverage rate of 12 m² per litre, 2.5 litres would cover approximately 30 m² for one coat, or 15 m² for two coats, before any extra allowance.

Actual results depend on the product and surface.

Do I always need two coats?

No. The correct number of coats depends on the paint and surface condition.

Two coats are common for many interior projects, but follow the manufacturer’s instructions.

Should I subtract doors and windows?

Yes, where those surfaces won’t receive the wall paint.

For small openings, leaving them in the calculation can provide a little additional allowance, but subtracting larger openings generally gives a more useful estimate.

Does the calculator include ceilings?

No. It estimates wall paint only. Calculate ceilings separately using their area and the coverage of the ceiling paint.

Can I use this calculator for an L-shaped room?

Yes, but it’s best to divide the room into individual wall sections and use the single-wall option where necessary.

Make sure every paintable wall face is included without counting the same surface twice.

Is the Nookcroft Paint Calculator free?

Yes. Our paint calculator is free to use and doesn’t require an account or subscription.

Plan Your Next Decorating Project

Knowing how much paint to buy is a useful first step towards a successful decorating project.

Measure your walls carefully, check the coverage rate on your chosen paint and account for the number of coats you expect to apply.

Our free paint calculator can help you estimate the quantity before you visit a DIY shop or place an order online.

Remember that the result is a planning estimate. Surface preparation, application technique and product instructions still matter.

For more useful tools, visit our Free Home & DIY Tools and Resources page.

And if you’re planning other affordable improvements around the house, explore our Simple DIY Home Improvements guide for more practical ideas.